Відео

*_QDTByG ese es el verdadero cambiando los led para que dure el bombillo MiltonAbraham desde Venezuela_*

How to prepar plastic bord??

I don't think it was necessary to wear the solder mask because you hadn't passed the corresponding track

Clean

damn u damaged the pads

That clog-nose on the iron is pretty smart

Trying this on a bashed up controller I got cheap that has joystick drift with a cheapo solder iron and sucker. Not only is hard to see the tiny holes but the sucker literally doesn’t suck. Probably messed up the board at 450 degrees trying to get the solder of

what is the stuff that they put before melting the tin?

thank you for sharing bro!

I believe you used a bit too much flux there. And a solder pump is more efficient than the copper braid, probably makes less fumes too.

Is flux needed when using the heat gun? Or can you just use the heat gun without flux

Thank you for the demo and for providing the links, really useful

super video 👍👍👍

Hello. What temperature where you using on your solder iron throughout the video? Thanks in advance. =)

I damaged the top pad. Where do I jump it to?

What is the blue stuff at 2:21?

What kind of tape are you putting on the PCB board?

how hot you use?

After de-soldering, wicking and cleaning up the flux I think I ruined the metal ring things on my pads. @0:52 yours look like nice and shiny. Mine are mostly gone. I've been trying to repair joysticks on my Dualsense for months. Am I screwed or is there a way I can still get the new joystick to connect to the board?

በጣም ደስ ይላል

I have a family member and her house burnet down because of a led nightlight. Ive noticed when my led bulbs go bad they start flickering and start smelling burnt. Look at his bulb it's the same thing you can see his is burnt to. Are these bulbs really safe?

So I melted the battery connector on the board, melted the connector for the light bar and after soldering the new modules on, melted the rubber inside them with the heat gun. They wouldn't budge an inch haha. Oh well, lesson learnt.

Im crying for the music man

Why soldering braid doesn't work for me? do I need to use flux first!

Can anyone tell me do people deal with the capacitors and resistors on theese boards or just better to get a new one

Hm🤔 the thing with the latch, will not close for me after changing battery. You seem to just push on it and i closed. My just pops back up

Here is a problem, because LED Strip usually have 3V LED`s and LED Bulb - usually have 9V LED.

At 2:35 I'm missing the round tin I don't know what it's called there's no more tin on it in the circle

Parabéns, trabalho de um verdadeiro profissional

Can you fix ic power ds5

At 1:48 you lay down a "tape" to protect other circuits from over exposure to hot air. What kind of tape is that?

ua-cam.com/video/zn8bsNHvLR4/v-deo.htmlsi=qEVDBkQH4fLxjT_X

18v smd replaced by 4v smd

Can you include in the description the repair green paint material you used at 2.50?

First time trying this, im surprised my controller still works once i got done 😅

I just tried too and failed..... i dont have heat gun to melt all solder points at once.... using solder sucker and iron alone is not enough....

2:36 - What is the name of the substance you use for repair ?

👍🏻👌🏻

What happens if you burn the metal on the hole. Now I cant solder in one of the potentiometers I burned the metal on the hole. Is it ruined or can this be fixed? The rest of the controller i did flawless

Please what is that orange tape?

Please is that aluminum tape? Is any other tape under it? I saw some people to use transparent orange tape before using the aluminum, but i dont know what it is. I just broke my Dualsense controller because i didnt have flux and hotair pistol

Very helpful. Thank you.

Your method is also very good, but it is a bit complicated for many people. I have a much simpler way, the tools are also rudimentary but maximum effective.

What temperature are you setting your heat gun?

Why are you adding more if you want to remove it?

Please I try to do it with Soldering iron kit 90w with my 2 ps4 controller the heat pen to the controller doesn’t work for me I need a step by step how many temp on the heat pen and do u have to press on the motherboard controller?? It’s difficult to move one with the First basic step

Dude if you are not good , the rest of us are a disaster at this. kudos to you!

Wish it was that easy for me

Mas maganda sna kung detailed at ngssalita pra madaling mattunan. Kea lng prang nanood ka lng sa gumagawa pero ayaw ituro

Love your 2 vid on ps5 joysticks. I used a hot solder sucker ($18 on aliexp) and used it to remove just the pots. After replacing I realized the sticks were kinda "sticky" so decided to replace the whole joysticks. Tried the tool again and got most of the solder out of all but the 4 biggest pins. Ordered a heat gun and will try to fully remove the sticks tomorrow per the video's technique. 2 questions. What foil tape are you using and what gauze are you using to clean? I got some kapton and ducting foil.. figured kapton is safe adhesive for the board and the foil will go on top to reflect heat. But saw you put foil directly on the board and wondered if regular duct foil would leave a residue.